Removal

• Disconnect the accelerator cable.
  • Remove the accelerator retaining clip.
  • Disconnect the accelerator cable.

  
  

   

• Detach the accelerator cable from the bracket.
  • Rotate the cable to release.
  • Detach the accelerator cable.

  
  

   

• Remove the footwell trim panel.
  

   

• Disconnect the accelerator cable from the pedal.
  

   

• Attach a draw cord to the accelerator cable to assist with installation.
  

   

• Remove the accelerator cable.

Installation

NOTE: The rubber grommets must be installed into the bulkhead and throttle body bracket before the accelerator cable is installed into the grommets.

To install, reverse the removal procedure.